How to configure “Cisco C- 2960-X”

Cisco C- 2960-X_Switch Configuration

How to configure “Cisco C- 2960-X”

You can use both LAN and Serial connection to login device.

(Test Network)Cisco Manageable Switch Access(Serial) Information

Serial Port= Com 1

Baudrate=9600

1. Login device with use putty.

Serial Port= Com 1

Baudrate=9600

2. Switch to privileged mode with enable command

Yazilim_Test_SW#enable

3. Switch to configuration mode with 'configure terminal' command

Yazilim_Test_SW#configure t

4. Switch to interface configuration mode enter the interface command

Yazilim_Test_SW(config)#interface gigabitEthernet 1/0/13

Yazilim_Test_SW(config-if)#switchport access vlan 706

Yazilim_Test_SW(config-if)#interface gigabitEthernet 1/0/14

Yazilim_Test_SW(config-if)#switchport access vlan 706

Yazilim_Test_SW(config-if)#interface gigabitEthernet 1/0/15

Yazilim_Test_SW(config-if)#switchport access vlan 706

6.Save your entries in the configuration file.

Yazilim_Test_SW(config-if)#copy running-config startup-config